|
||||||||||
|
||||||||||
|
|
||||||||||
|
||||||||||
Preparation of the wall. Prepare the wall where necessary with water-based acrylic sealer, then apply on the walls with the roller brush the Primer Colori da Vivere to a uniform covering. If necessary dilute with water – max 10%. Average coverage 10 sq. m./litre. |
||||||||||
 Preparation of the colour. Chose the CUP COLOR which you prefer and mixing it thoroughly, then pour it inside one of the three Colori da Vivere bases – if it is necessary use a syringe; mix manually up to when you think that the product has a uniform colour. Use no mechanical blenders. |
||||||||||
Application the Impression effect. To obtain this effect it’s necessary one of the three Colori da Vivere bases: TERRA, SOLE o LUNA. Take the glove and wet its surface with a generous amount of product. Start application ‘caressing vigorously’ the wall – the surface - with a casual movement, going up and down, moving from above downwards continuously. To complete the corners it is useful a brush. When the product on the glove tends to finish charge it again with a lot of product and carry on caressing the surface. Once applied the product looks wrinkled and wet; after 15-20 minutes the surface starts drying, at this point the ageing affect comes on the scene: use the glove with no product on, caress again the surface but in a much softer and delicate movement. This action balances the effect of the colors contrasts increasing the chromatic speckles range. When the surface will be dry you will notice the spread of beautiful chromatic experiences all over it. The bases SOLE and LUNA are characterized by gilded and silverplated fragments, which give to every surface a light effect of internal relieves, improving the strength of the dark and bright spectacles, with the result of a refined choice of elegance and originality. Average coverage 8 sq. m./litre. |
||||||||||
 Application the Velato effect.
This effect is obtained using the base Colori da Vivere TERRA. Take the glove and wet the surface with little product. Begin the application moving from above downwards, be careful of making a light pressure in the action, like a soft contact; spread the product casually veiling it as much as pleased. Tone down the points of clots and work to avoid the forming of a kind of curd. To have a stronger tone wait the surface to be dry and repeat the application. Use a brush to complete the corners. Average coverage 16 sq. m./litre. |
||||||||||
|
Application VENERE. 
Colori da
Vivere VENERE
can be applied both using the brush and the glove, do not mix the two
techniques. This application offers varied surprising aesthetic
results. Prepare the surface accurately, and then apply the first hand
of product with the brush or the glove. Paint with a disordered and
irregular movement to the complete covering of the wall. After 4-6
hours the wall is dry, at this point apply again the product continuing
with the technique chosen at the beginning – glove or brush. This
second hand gives a soft metallized effect able to change tonality in
relation to the light in the room, with glazed and dynamic contrasts. Average coverage 9 sq. m./litre. (2 coats) |
||||||||||
|
TECHNICAL FEATURES
PRIMER – Water-borne acrylic paint for internal use, it does not
contain solvents. Protect the product from the cold and the hot
temperatures; keep from 4 to 39 °C. Apply with the brush or the glove,
dilute with water max for the 10% and only if necessary. Dry to the
touch after 3-6 hours, it gets completely dry in 7-10 days. 2.5 litres
or 5 litres boxes available.
Average coverage 10 sq. m./litre. VOC:max30 g/l (max allowedo 50g/l 2007 – 30g/l 2010 – cat A/g) CUP COLOR - water-borne colouring matter, oxides borne - Protect the product from cold and hot temperature, keep between 4 and 40°C. Shake before the use. 100 ml cans available. VOC: max20 g/l (max allowed 300g/l 2007 – 200g/l 2010 – cat A/l) TERRA – SOLE – LUNA - Acrylic water-borne product for internal use, washable and transpiring, it does not contains solvents. Protect from cold and hot temperature, keep between 4 and 40°C. Apply with the glove, do not dilute. Ready to use. Dry to the touch 4-8 hours, it gets completely dry in 10-15 days. 1 litre, 2.5 litres and 5 litres boxes available. Average coverage (see type of application). VOC: max50g/l (max consentito 300g/l 2007 – 200g/l 2010 – cat A/l ) VENERE – Acrylic water-borne product for internal use, washable and coating with metallized effect, it does not contain solvents. Protect from cold and hot temperature, keep between 4 and 40°C. Apply with the glove, do not dilute. Ready to use. Dry to the touch in 4-6 hours, it gets completely dry in 10-15 days. 1 litre, 2.5 litres and 5 litres boxes available Average coverage 9 sq. m./litre. (2 coats) VOC: max50 g/l (max consentito 300g/l 2007 – 200g/l 2010 – cat A/l) |
||||||||||
|
|
||||||||||
| COLOREVOLUTION SRL - P. IVA 04898240967 | ||||||||||
